OBDSTAR MP001 Set (MP001 Programmer with ECU Bench Jumper) for OBDSTAR DC706 and X300 Classic G3

 

 

MP001 is the latest multifunctional programmer developed by OBDSTAR, which fully supports data read/write, clone, data processing functions for automotive, commercial vehicle, new energy vehicle, motorcycle, marine (jet-ski).

Compatible with OBDSTAR DC706 and new X300 Classic G3.

Software function

EEPROM/MCU reading and writing
Key flashing
Steering angle repair
Body computer data processing
Immo off
Pincode reading
Battery module repair
Instrument repair
and more functions are under development.
 

 

1. MP001 is compatible with the function of the P002 adapter (TOYOTA/FORD all keys lost adapter, HONDA/YAMAHA/SUZUKI all key lost adapter) and P003/P003+ adapter (some models of engine/transmission clone K/CAN conversion, BOOT mode read/write).

 

2. MP001 can replace P003, P002 adapter as well.

3. When use MP001 with DC706, just plug it in and the 706 will update the firmware then upload what it needs to configure the MP001 for whatever ECU you are connecting to. All automatic.

4. When read and write Chrysler GPEC2 ECM etc, MP001 does not require a 120ohm resistor between CAN H and CAN L wires, P003/P003+ does need it. 

Note:
MP001 has P003+, P003, P002 functions. 
Different tablet device models require different configuration software.


Specification:
 

CPU	STM32F407VET6
Connector	DC，OBD female，OBD male，DB9，DB25
Input voltage	DC 12V/24V
Output voltage	500mA
Weight	260g
Working temperature	-10℃~55℃
Device Size	165*110*35mm

 

1pc x OBDSTAR MP001 Programmer 

1pc x OBDSTAR C4-01 Host 

1pc x W004 Read/Write soldering wire

1pc x W005 Read/Write soldering wire

1pc x W006 Clock frequency wire

1pc x OBDSTAR ECU Bench Jumper