2 Years Update EU/UK Version 2024 New Launch X431 PAD V Elite Full System Diagnosis, ECU Coding, ECU programming,Topology Mapping, FCA Autoauth 50 Special Functions

Product Description

What is the difference between EU Version and Global Version?

1. EU Version and Global Version support the same functions.

2. The EU Version is specially designed for European customers and only supports working in the European region ( including Russia and the United Kingdom)

3. The Global Version has no IP restrictions and can be used worldwide.


LAUNCH X431 PAD V Elite EU UK Version Highlights:

1. High configuration hardware: 10.1 inch Touchscreen, sun readable screen, protection grade IP65, more waterproof, more resistant to falling, and the vehicle can work normally after rolling

2. Support 5G Wi-Fi Diagnosis, 4GB RAM + 128GB ROM （can up to 256GB）

3.Updated the connector from Smart Box 3.0 to Smart Lick C, Smartlink C supports remote diagnosis (needs activation card)

4. Online ECU Programming + Online Coding + J2354 Programming ((How to activate online programming function on PAD V))

5. OE-Level Full System Diagnosis + 50 More Reset Service

6. Full Bi-Directional Control / Active Test + ECU Coding + Guide Function

7. FCA AutoAuth Access + SCN Online Coding

8. Support support Topology Mapping + J2534/RP1210/D-PDU / CAN FD DolP New Protocols

9. 25 Language Support, No language barrier

10. Auto VIN Scan + Diagnostic Feedback +Maintenance records, ect

11. Support the expansion of 24V truck diagnosis (Optional)

12. Added Tesla _EV vehicles: Model - 3, Model - S and Model- X ( Buy in MALL)

13. 2 Years Free Update. Software subscription $399 per year later. 
besides, you can use all functions as normal after 2 years free update,it will not be locked

14. 5 Years Warranty + Free Tech Supports

15. Extended module: Compatible with Oscillograph, X-PROG 3, TSGUN Wand, RF-Sensor, BST360 Battery Test, VSP600 Videoscope, ADAS, 24V Heavy Duty software , Wi-Fi printer, New energy vehicle, Multimeter, Ignition analysis etc.

16. Check PAD V online programming/coding, Topology Car List
 

New Function: ODO check and ODO check , Reset MSVIN

ODO check: Read the mileage information stored in each module;

RESETMSVIN: Read the VIN information of each module and cooperate to check whether the vehicle has been changed in mileage or replaced
 

Multi-Language Supports

Support English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish, Persian, Romanian, Serbian, Swedish, Chinese Traditional
Language is free, switch at will

Programming Functions:
 
Vehicle Programming
 
1.For Great Wall : support Great Wall, Haval (ECM/AT #), WEY, Oula
 
2.for Volkswagen Audi advantages: online programming (support for programming and resurrection), firmware upgrade for fuel quality defects, online parametric configuration, part number upgrade, support for manual programming ( more online codes, more online parametric configurations, more online matching and calibration)
 
3. for Benz advantages : manual control unit programming; clone.
 
4. for BMW advantages: the code setting data is up to March 22, and it supports modification. Brush hiding has function help, and brush hiding has expert mode.
 
5. for Mercedes Benz advantages : 13 years ago, it had initialization startup (programming, code setting, anti-theft, initialization). After 13 models, the engine module and transmission module can be cloned.
 
6. for Ford advantages: Since 2018, all models and functions of FORD original factory have been online.

Basic function: After 18 years, X-431 is offline
Special function: After 18 years, X-431 will be online
The original manufacturers of Chrysler and FIAT have gradually put all models and functions online since 2018. X-431 all functions online
 
ECU Programming
 
1. Programming new ECUs: Replace new ECU(Determine if programming or coding is required based on fault code prompts). It can read and back up the original ECU data of the vehicle. (Note: The newly purchased spare part numbers need to be equal to the original ones.)
 
2. Reprogramming second-hand ECUs: Clear second-hand ECU data for reprogramming(if the second-hand has the anti-theft data, it needs to be used with LAUNCH X-PROG3 to clear anti-theft data first, and then match it with the original anti-theft data before reprogramming.).
 
3.Update the ECU: Some of the ECU has BUGs so it will cause some faults that are difficult to repair. ( For BMW 2889 DME intake valve, carbon deposition, and some of F serious machine oil lamps can't be zero.)
 
4. Fixing lost data of ECU: When the software in the ECU corrupts the program due to battery or grounding issues(the Hardware is normal), re-programming can rectify it back to normal operation.
 
5. Reprogramming on failed programming ECU: If the programming fails but the hardware didn't damage, the LAUNCH X431 PAD V ELITE can reprogram the module in Manual Mode which is compatible with VW/Audi/Ben/BMW. And it supports Programming Backup/Restoration that is applied to match anti-theft data for Mercedes-Benz engine modules and transmission modules, which requires purchasing X-431 PROG3 additionally (If the programming fails, ECU will not communicate and you will not be able to access the system ).
 
Please Note: Programming is no IP Limited except Spain and Portugal.
 
Work with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming
 
Support Protocols: CAN/CAN_PS/FT_CAN_PS/SW_CAN_PS/FT_ISO15765_PS/ISO15765/IS O15765_PS/SW_ISO15765_PS/ISO14230/ISO14230_PS/ISO9141/ISO9 141_PS/J1850PWM/J1850PWM_PS/J1850VPW/J1850VPW_PS
 
Support for Toyota, Lexus, Thain, Honda, Acura, Volvo, Volkswagen, Audi, Sieter, Skoda, Bentley, Lamborghini, BMW, GM, Opel, Saab, Chevrolet, Cadillac, Ford, Chrysler, Subaru, Mercedes, Land Rover, Jaguar, ect ，Updating

Supports Benz, Porsche, Skoda, Seat, Sprinter, Nissan infiniti, Hyundai, Kia, Chery, Geely online programming till 2023. Part of Renault till 2021, Subaru till 2022, Ford/Mazda till 2019, Audi, VW, BMW, Smart till 2024
 
Support DolP, CAN FD and other protocols with SmartLink C connector
 
It is compatible with CAN-FD protocol and supports the latest For GM vehicles manufactured after 2020. Adopts advanced CRC algorithms to accommodate more data from 8 to 64 bytes in the CAN frame, which runs faster than other products and reduces the risk of undetected errors to greatly enhance the user experience.
 
Supports For Chevrolet Onix 2020-2021 year
Supports For Chevrolet Tracker 2020 year
Supports For Chevrolet Suburban 2021 year
Supports For Chevrolet Tahoe 2021 year
Supports For Buick
Supports For Cadillac Escalade 2021 year
Supports For Cadillac Escalade 2021 year
Supports For GMC Yukon 2021 year
Supports For GMC Yukon XL 2021 year
Supports For Holden
Supports For DAEWOO
Supports For Alpheon
Supports For Ravon
Supports For Pontiac
Supports For Saturn
Supports For Hummer
 
DoIP
 
With Diagnostics over DoIP, diagnostics introduced over UDS are used over TCP/IP and Ethernet. This enables much higher data rates than with CAN. save both in terms of time and expenses in the case of complex diagnostic tasks and flash applications. Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later).
 
What is Programming Function ? What different is Online Programming and Offline/J2534 Programming ?
 
Programming Function is to finish program/ rewrite/ code/ match new ECU after new module replacement. Taking your business to a new height, it can for :
1) program the new adaptive data to the on-board modules;
2) replace the existing software/firmware in the ECUs;
3) match the component control modules after repair or replacement;
4) flash the hidden functions and
5) enhance the vehicle performance.
 
Online Programming is download the original data from automaker service directly , it is ensures the correctness and latest version of the data you get , Improves the success rate of programming !!!
 
Offline/J2534 Programming is used when you had the data , just write it to you ecu directly(if you do not have the data, you can not do programming function).
 
* X-431 PAD V ELITE online programming does not require an expensive online account, just connect to WIFI, saving maintenance costs.
 
* smartbox adopts dual WIFI communication to improve programming speed, thereby reducing the possibility of programming errors
 
* When using J2534 tool, in addition to the connector, it is also necessary to consider issues such as adapting the computer, installation costs, and complete functions, which is not cost-effective.
 
Supported Car List
 
Chinese cars: Beijing Automobile, BAIC Magic Speed, Dongfeng Fengshen, GAC Trumpchi, GAC Mitsubishi, Haima, Mustang, China GM, Beijing Jeep, Beijing Hyundai, BYD, Changan Suzuki, Dandong Shuguang, Dongfeng Fengxing, Hainan Mazda, Geely, JAC , Jiangnan Alto, Lifan Motors, Nanjing Iveco, Chery, Qingling, Shanghai Volkswagen, FAW-Volkswagen, Zhengzhou Nissan, Zhidou, Zotye, ZTE, etc.
 
Asian cars:Honda, Acura, Toyota, Lexus, Mazda, Nissan, Infiniti, Hyundai, Kia, Ssangyong, Daewoo, Isuzu, Daihatsu, Suzuki, Mitsubishi, Subaru, etc.
 
American cars: Chrysler, Dodge, Jeep, American Ford, Lincoln, GM, Buick, Cadillac, Chevrolet, etc.
 
European cars:Aston Martin, BMW, Rolls Royce, Mercedes-Benz, Maybach, Peugeot, Volkswagen, Bentley, Bugatti, Ferrari, Fiat, Abbas, Lancia, Romeo, Renault, Maserati, Lamborghini, Citroen, Audi , Porsche, Volvo, Land Rover, Jaguar, Rover, Opel, Skoda, SEAT, Mini, Saab, etc.
 
Package Includes:

1pc x LAUNCH X431 PAD V ELITE tablet
1pc x SmartLink C 
1pc x for K-20 adapter
1pc x for G/V 12
1pc x for FD 6+1
1pc x for HA 3
1pc x for TA 22
1pc x for TA 17
1pc x for CR 6
1pc x for B 20
1pc x for BZ-38
1pc x for BZ-14
1pc x for M/H-12+16
1pc x for NN/14+16
1pc x OBD main cable
1pc x lighter
1pc x power cable clips
1pc x USB cable
1pc x test cable
1pc x power cable 
2pcs x boxes
1pc x user manual