8inch TouchScreen + Android 10.0 +4GB RAM+64GB ROM
Full System Diagnostic, ECU coding and 37 special functions
with DBScar VII, supports CAN FD and DoIP protocols
Supports automatic scanning, automatic VIN recognition, control module programming and coding, ECU setting, instrument coding, tire pressure monitoring system, maintenance light reset, CO adjustment, idle speed adjustment, A/F value reset, ABS control unit setting, EOL mode, transmission memory reset, clear computer memory etc.
With KC501,Comprehensive IMMO/Key Programming Functions
With X-MVCI J2534 VCI. Supports BMW, Benz, VW, Audi, SKODA, Ford, Mazda online programming
Supports Full Systems Diagnostics, 42 special functions, ECU coding and Topology Mapping
Audi A6L Q7 MMI control system of the vehicle entertainment system is a very important human switching control unit, on the Audi, this control mechanism is named as E380, a separate control unit, due to the installation location, design and other factors, MMI often appear out of control, control switch system failure, MMI does not start, function selection key failure and many other issues, there is a serious discharge, MMI system suspended animation, black screen after startup, failures and other control options menu.
Used to connect the XHORSE KEY TOOL PLUS tablet or XHORSE MINI PROG to erase and read & write the BMW original car instrument 35080 chip
Supports 2004-2010 Touareg, A8, Porsche (Cayenne), 2005-2012 Phaeton, 2005-2015 Bentley.
OEM 5K0905861C Car Steering Column ELV Emulator for 2014-2015 Volkswagen Sagitar, Lavida, Tiguan
Includes 12 Month Subscription from date of purchase.
The software is delivered on a USB-dongle and is run directly from it. It does not require any special installation that is why ECM Titanium can work on any computer at hand. Thanks to the built-in memory, you will always have your original and modified files and Drivers with you.
2-year hardware warranty.
Multi languages are supported.
Supports USB connection, WIFI direct connection, wireless LAN connection.
VNCI 6516SZ Suzuki automobile special inspection tool is compatible with the original SDT-II software driver.
No third-party software is required. It is plug-and-play and can replace the original MTS 6516 Suzuki special inspection tool.
SmartLink C 2.0 is an upgraded version of HDIII, with hardware upgrade and function upgrade.
Replace Launch X431 V+ and HDIII module.
For 12v and 24v heavy duty trucks
VXSCAN PT1000 is the best electrical tester for reducing diagnostic time in all 8 to 50 volt vehicle electrical systems. It is short circuit protected, and its internal circuit breaker will trip if it becomes overloaded. The long extension cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds.
Detemine if your relay has a 4-pin or 5-pin blade configuration.
Xhorse Multi Prog Full Set with XDMPO4GL VH24 SOP44 & TSOP48 Adapter, XDMPO5GL VH29 EEPROM & FLASH Adapter for 8 pin Chip, XDMPO6GL VH30 SOP44 Solder Free Adapter, XDMPO7GL VH31 TSOP48 Solder Free Adapter.
Supports PIAGGIO group diagnosis and key programming.
Supports Automatic scanning, automatic VIN recognition, control module programming and coding, ECU setting, instrument coding, tire pressure monitoring system, maintenance light reset, CO adjustment, idle speed adjustment, A/F value reset, ABS control unit setting, EOL mode, transmission memory reset, clear computer memory etc.
D700 B (Mainly for Outboard), supported brands as below: EVINRUDE, HIDEA, HONDA, JOHNSON, MARINER, MERCURY, PARSUN, SELVA, SEVEN, SUZUKI, TOHATSU, YAMAHA...
Pro level ECU coding + VAG guided function
OE Level full system diagnostic+ Bi-directional control
40 Service functions, same as Autel Ultra/MS919
WiFi print+ Pre & Post scan+ Scan VIN/license+ IMMO Service
Supports CAN FD and DoIP, 6x Faster powerful hardware
EU/UK Version, IP limitation, for EU/UK Users only.
Full system diagnostics + bi-directional control + 38 service functions
ECU offline/online coding, FCA AutoAuth, Topology mapping, Multi-language, 2 years free update
Spporting CANFD & DoIP
10000+ Car Coverage, Serve Global 99%+ Cars. It can work on 1996-2024 cars
Far superior to other comparable rival scan tools in functions, hardware, and car coverage
Support ECU Coding, All System Diagnostics, Bi-directional Control , CANFD&DOIP, 32+ Resets, FCA AutoAuth, V.A.G Guided Function
Top-level Configuration with Faster Speed: Android 10.0, 2.0 GHz 4-Core CPU, 4GB RAM, 64GB ROM, 8” Touchscreen, 2.4 & 5 GHz WiFi, 6000mAh Battery, 8MP Rear Camera
Compatible vehicle models are as follows:
Tesla Model 3: January 2020 to September 2027
Tesla Model S: June 2021 to March 2031
Tesla Model X: January 2021 to April 2029
Tesla Model Y: October 2020 to February 2031
With DBScar VII, Supports CAN FD, DoIP protocols
Full system diagnostics + bi-directional control + 38 service functions
ECU offline/online coding, FCA AutoAuth, Topology mapping, Multi-language, 2 years free update